Buy Aquatic Life RO Classic - 4 Stage Reverse Osmosis / Deionization System 100 GDP | Fine Pebble Aquarium

Aquatic Life RO Classic – 4 Stage Reverse Osmosis / Deionization System 100 GDP

$465.00

or 4 payments of $116.25 with Wizit learn more

Category: Tag:

Aquatic Life Classic 100 GDP 4 Stage RO/DI

The Classic RO & RO/DI systems make up to 100 GPD of economically filtered Reverse Osmosis water, removing harmful substances like heavy metal ions and total dissolved solids from tap water. The Classic RO/DI system provides up to 100 GPD of economically filtered reverse osmosis water, removing harmful substances such as heavy metal ions and total dissolved solids from tap water.

FEATURES:

  • Manual flush valve allows user to increase membrane life
  • Clear micron cartridge housing makes it easy to view when cartridge should be replaced
  • Auto shut-off valve stops incoming water supply when outflow is turned off
  • Wrenches make it easy to access the cartridge and membrane housings
  • Garden hose adapter make it easy to connect to a faucet
  • 1/4 inch Buddy-Fit Press Fit Connectors simplify plumbing
  • 0-160 PSI gauge provides a pressure reading of the supply water
  • 10 ft. x 1/4 inch of each Blue, Yellow and Red Polyethylene Tubing helps with plumbing setup
  • Built-in wall mount bracket allows the unit to be hung and secured in place.

OPERATING REQUIREMENTS:

  • OPTIMAL WATER PRESSURE: 40-65 PSI (IF UNDER 40 PSI A BOOSTER PUMP IS REQUIRED)

  • MAXIMUM WATER PRESSURE: 80 PSI (IF OVER 80 PSI A PRESSURE REGULATOR IS REQUIRED)

  • OPTIMAL WATER TEMPERATURE: 77*F (25*C)

  • MAXIMUM WATER TEMPERATURE: 105*F (40.5*C)

  • TYPICAL REJECTION RATE: 1:3.5

PRODUCT SPECIFICATIONS:

  • 100 GPD dimensions with bracket: 16.5″ wide x 8.5″ deep x 18″ high
  • Weight 14 lbs.
  • Minimum water pressure: 30 PSI
  • Suggested water pressure: 65 PSI
  • Maximum water pressure: 80 PSI
  • Optimal Water Temperature: 77°F (25°C)

 

STAGE 1 – SEDIMENT FILTER

Recommended change 3-6 months or 3,500 gallons total or 900 gallons of filtered water. The first stage of your RO unit is a five micron sediment filter that traps sediment and other particulate matter like dirt, silt and rust which will affect the taste and appearance of your water

STAGE 2 – CARBON BLOCK FILTER

Recommended change 3-6 months or 3,500 gallons total or 900 gallons of filtered water (at 1 ppm chlorine). The second stage of your RO unit is a carbon block filter. The activated carbon in the filter reduces chlorine and conditions the water prior to the RO membrane

STAGE 3 – RO MEMBRANE

Recommended change 12-24 months

The RO membrane reduces impurities known as total dissolved solids (TDS) from the water down to 1/10,000 of a micron, reducing arsenic, lead, parasitic cysts, copper and more because the process of filtering the high-quality water takes time, it is common to use a storage tank to collect filtered water, making it available on demand.

STAGE 4 – COLOR CHANGING RESIN (DEIONIZATION)

Replace filter when resin changes color. After the water is filtered by the membrane, there is usually a small amount of total dissolved

solids (TDS) left in the water. In certain non-drinking water applications, it is important to remove the remaining TDS from the water. This is accomplished by filtering the water through a resin that is charged with cation and anion resins (H+ and OH-). As the resin absorbs the TDS, it will change color. When all resin has changed color, it is time to replace the DI filter.

 

Reviews

There are no reviews yet.

Be the first to review “Aquatic Life RO Classic – 4 Stage Reverse Osmosis / Deionization System 100 GDP”
Shopping Cart
All search results